EN 
ES
PT
SV
DE
TR
FR
Legeeritud terasest ülitäpne sirge ja spiraalne hammasratas hammasratastega lineaarses ajamis ja raskeveokite ülekandes kohandatud
Lähtekoht: | Jiangsu provints, Hiina |
Tootja nimi: | JIANGSU WENAN RASKE TÖÖSTUS, LTD. |
Mudel: | G-3 |
- Kirjeldus
- tehnilised nõuded
- Rakendused
- konkurentsieelise
- Küsitlus
Kirjeldus
Kiire täpsus:
1. Rack/ rack gear/ toothed bar/ toothed rack
2. Used in synchronization mechanism, linear guides, machine tools, manipulator, etc.
3. Available: length<= 2 meters
Miinimum Kogus: | 1 |
Hind: | Sõltub spetsifikatsioonidest |
Pakend andmed: | kriimustus-, rooste-, niiskuskindel või vastavalt soovile |
Tarneaeg: | Sõltub sihtriigist |
Pakkumise võime: | rohke |
A gear rack is a special gear with teeth distributed on a bar-shaped body. It is equal to a segment of the circumference of a gear with an infinite diameter. There are many teeth evenly distributed on one side, meshing with gears, turning rotation into linear movement, or turning linear movement into rotation. The gear racks are also divided into spur racks and helical racks, which are paired with spur gears and helical gears respectively. The tooth profile of a gear rack is a straight line rather than an involute (for the tooth surface, it is a flat surface). It is equivalent to an infinite cylindrical gear with the index circle radius.
tehnilised nõuded
MATERJAL | Kõrge tugevusega legeerteras, nt. 18Cr2Ni4W, 20Cr2Ni4A, 17CrNiMo6, 18CrNiMo7-6, 20CrMnTi, 40CrNiMo, 30CrMnSi, 27SiMn, 35CrMo, 42CrMo, 40Cr jne. |
Moodul (mm) | 0.5 ~ 10 |
Kogupikkus (mm) | 100 ~ 2000 |
Hamba viimistlus | Standardne, ülitäpne |
Hamba tüüp | Sirged hambad, spiraalsed hambad |
Lubatud pöördemoment (Nm) | 0 ~ 22000 |
Rakendused
(1) Synchronization mechanism. The synchronization mechanism of a gear rack is generally used in case of cylinder array power, hydraulic cylinder array power to ensure power synchronization and prevent movement mechanism from stalling and uneven motion caused by low processing accuracy.
(2) Movement direction conversion. A gear rack and pinion mechanism is an approach to convert linear motion into circular motion. In practical applications, it can be used with air cylinders and hydraulic cylinders. Under normal circumstances, the linear motion of a gear rack can be installed with linear guides and sliders.
(3) Motion output. A gear rack can be directly used as a motion output component and can be applied to the end effector of a manipulator and a driving mechanism of up and down movement.
konkurentsieelise
- capability of customization of gear rack from drawings, 3D models, or simple part.
- capability of non-standard gear teeth of gear rack manufacturing.
- tootmisprotsessi terviklikkus, sealhulgas materjali valimine, sepistamine, peenetöötlus, lihvimine, kuumtöötlus ja pinnatöötlus jne.
